Wine Enthusiast 237029403 Manual Pagina 10
- Pagina / 20
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
10
1. Pry up the hinge cover (1) and hinge cap (2) using a flat head screwdriver.
Using a Phillips head screwdriver, loosen the hinge screws (3a) and remove
the top hinge (4). You can now lift the door (5) off the bottom hinge and set
it off to one side. Be careful not to lose the washer (11) between the
bottom hinge and the door. You will need this later. Also remove lock hole
cap (6) and screws (7) and (8) from the top of the door. The lock cap can
be pried up using a small flat head screwdriver.
2. Using a Phillips head screwdriver, loosen screws (3b) to remove the hinge
support rod (9) at the bottom of the door. Rotate the door 180° so that the
top is now the bottom and vice versa. Attach the bottom hinge support rod
(9) to the bottom corner of the door and attach with screws (3b).
3. Using a flat head screwdriver, pry off the bottom hinge cover (12). Using a
Phillips head screwdriver, loosen and remove screws (3c) and (13) and
bottom hinge (10).
4. Move bottom hinge (10) to the opposite side and re-insert all screws (3c)
and (8). Bottom hinge cover (12) should clip back onto the bottom hinge
(10).
5. Place the washer (11) over the hinge support rod (9) and place the door
back on the bottom hinge by aligning the hinge support rod (9) with the
outer hinge hole on bottom hinge (10).
6. Re-attach top hinge (4) using screws (3a). Insert lock cap (6), screws (7)
and (8), and clip on hinge cap (2).
Stainless steel doors include a handle centered in the middle of the door. There is
no need to alter the location of the handle.
Glass doors include integrated door pull handles. There is no need to alter the
location of door pull handles.
- N’Finity Pro M Wine Cellar 1
- IMPORTANT SAFEGUARDS 2
- Serial number 3
- Table of Contents 4
- Electrical Requirement 5
- Install Limitations 5
- Use of Extension Cords 5
- Wine Cellar Features and Use 6
- Parts and Features 7
- Reversing the Door Swing 9
- Operating Your Wine Cellar 11
- Before You Start 12
- Interior Light 14
- Door Lock 14
- Technical Data 15
- Troubleshooting 17
- Limited Warranty 19
- Wine Enthusiast 20
- Valhalla, NY 10595 20
Relacionado con productos y manuales para Enfriadores De Vino Wine Enthusiast 237029403
Enfriadores De Vino Wine Enthusiast 237036603 Manual
(20 paginas)
(20 paginas)
Enfriadores De Vino Wine Enthusiast 237022903 Manual
(20 paginas)
(20 paginas)
Enfriadores De Vino Wine Enthusiast 237024604 Manual
(20 paginas)
(20 paginas)
Enfriadores De Vino Wine Enthusiast 237028703 Manual
(20 paginas)
(20 paginas)
Jet Tools JWBS-24 manuali
Manuali dei proprietari e guide per l'utente per Lavorazione del legno Jet Tools JWBS-24.
We fornisce 1 manuali pdf Jet Tools JWBS-24 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentarios a estos manuales